Optimizing transport solutions

RO BG EN

HUMBAUR - HTD40

Code: HUMBAUR HTD40

4 axles equipment trailer

FLATBED TURNTABLE TRAILER - With offset cargo bed

HTD40 - four axle cranked

 

The new four-axle model in the HTD series has an offset cargo bed and a cargo bed that can be lowered with air suspension for particularly easy loading. Choose from three heights for the drawbar. On request you can get this model with a particularly durable hot-dip galvanised chassis. The hot-dip galvanised chassis provides optimum corrosion protection. An extensive selection of accessories makes the HTD suitable for any special requirement.

Details of the HTD40 - four axle cranked flatbed turntable trailer:

- Solid welded frame: Solid, welded frame made of high-strength, fine-grained steel and full-length cross-beams for maximum stability, wheel recesses above the rear wheels, front corners chamfered, climbing rails on the ramp at the back for maximum safety during loading and unloading. Straight or cranked cargo bed. 

- Floor made of 50 mm softwood planks

- Tie-down rings: 3 pairs of 10 t lashing rings recessed in the flatbed 2 pairs of 10 t lashing rings recessed in the upper part of the loading area, optional 5 pairs of 3 t lashing and stanchion recesses in the outer frame.

- Air suspension system incl. lifting and lowering 

- Braking system: EBS braking system, spring-loaded parking brake

- Drawbar with 8° inclined towing ring Ø 40 mm, height-adjustable silent bushes.

- Solid, welded construction of the turntable with large slewing ring

- Flatbed axles with closed drum brake

- Mudguard: Front half-shell mudguard with anti-spray system in front; steel mudguard with anti-spray system at the rear

- 2 wheel chocks with retainers        

- Single-section, hot-dip galvanised drive-on ramps, laterally movable, directly acting, fixed spring lifters for convenient operation, optimally secured by a turnbuckle and latch. 

- EBS braking system, spring-loaded parking brake.

- Light clusters, impact-proof and secured against vibration, protected in the underride protection, 24 V, 15-wire connection cable. 

- Folding lateral impact protection, contour markers at the sides and rear.

- Two recessed toolboxes with folding lid in the upper part of the loading area.

TECHNICAL DATA:

HTD 409525
Permissible gross weight (kg)24.000 / 40.000 Internal dimensions (mm)2.570 + 440 + 7.160 / 2.520 
Own weight (kg)8.300Total dimensions (mm)11.710 x 2.540 x 3.780 
Load capacity (kg)15.700 / 31.700Drive-up angle10º
Load height (mm)900  Tyre size235/75 R17,5 x 16 pcs.
  • HUMBAUR - HTD40
Find more about "HUMBAUR - HTD40"