WEIGHTS & DIMENSIONS:
Gross vehicle weight: 40.000 kg
Own weight (±2%): 6.400 kg
Payload (±2%): 32.600 kg
Total length: 11.370 mm
Total height (unloaded): 3.600 mm
Axles spacing: 1.410 + 1.310
Volume: 55,2 mc
Euro-pallets capacity: 24 pcs.
CHASSIS:
Welded structure made of fine-grain steel (SSAB STRENX S700), “gooseneck” type.
Rear chassis reinforcement plate for increased tipping stability.
Coupling plate with interchangeable 2” Jost kingpin, according to DIN 74080.
Side underrun protection on both sides, foldable, made of aluminum with stainless steel plates.
Rear underrun protection bar made of steel, pneumatically foldable (automatic or manual).
Jost landing legs.
2 spare wheel holders with winch.
RUNNING GEAR
3 x SAF Intradisc CD axles.
Premium Knorr-Bremse pneumatic control system, latest generation.
Disc brake system, EBS, 2S/2M, RSP, with heavy-duty Knorr calipers.
Air suspension, HS valve, with automatic ride height control system (iLvl), BLS.
First axle liftable automatically depending on load.
6 tires 385/65R22.5 164K (regional profile, Dunlop SP247 HL), mounted on steel rims.
Complete spare wheel.
6 individual wheel mudguards, PVC (1/2), splash guards for the last axle wheels.
ELECTRICAL SYSTEM
24V electrical installation, ADR compliant (Aspöck).
Front electrical connection box with sockets 2x7-pin (ISO 1185 / ISO 3731) and 15-pin (ISO 12098), ABS/EBS coupling socket, air coupling connectors.
Rear lighting system with 2 Aspöck Ecoled III taillights (full LED).
2 additional LED reversing lamps, LED marker lamps.
SUPERSTRUCTURE
Body fully made of special aluminum profiles and sheets, continuously welded.
Additional reinforcement of the side boards towards the rear.
Front wall made of inclined aluminum.
Reinforced steel front corner structures.
Floor made of special aluminum plate HB114, 7 mm thick.
2 equal rear aluminum doors, Combi type – dual opening (swing and side at 270°), with reinforced aluminum frame.
2 controlled discharge hatches 380 x 380 mm (one on each door).
Mehler Polymar tarpaulin with lateral rolling support, main tarpaulin density 680 g/m² + reinforcement in contact areas with body using 900 g/m² tarpaulin.
4 side straps (width 50 mm) with tensioning systems and protective pads.
4 arched removable roof bows with 4 upper securing chains for the body.
Front working platform with access ladder and anti-slip floor, fully hot-dip galvanized, chassis-mounted.
Body design allows for euro-pallet transport.
TIPPING SYSTEM
Front tipping with Hyva hydraulic cylinder, hose for tractor hydraulic coupling.
Body guidance on return to chassis after tipping and Hyfix system.
OTHER EQUIPMENT
Lockable toolbox.
2 wheel chocks with holder.
Water tank with soap dispenser.
Load pressure gauge.
Rubber splash flap mounted on rear underrun bar.
Wheel wrench, reflective triangle.
Telescopic bar for tarpaulin strap operation, with chassis-mounted holder.
Aluminum ladder with chassis-mounted holder.
Broom and shovel mounted on front wall support.
Rear retractable ladder, mounted under the floor. |
