Оптимизиране на транспортните решения

RO BG EN

HUMBAUR - HTD50

Код: HUMBAUR HTD50

5 axles equipment trailer

HTD 50 - The five-axle top model

Flatbed Turntable HTD 5-axle cranked

Our top model for extremely heavy tasks with a total weight of up to 50 tons. Its solid welded construction, high-strength fine-grain steel, and cargo bed which can be loaded by air-suspension make the HTD 5-axle model a reliable partner. The cranked cargo bed area serves as a stop for wheeled or tracked vehicles. The cargo rests against a stop and is easier to secure. The model has single-part hot-dip galvanised, movable drive-up ramps.

Details of the HTD50 - five axles flatbed turntable trailer:

- Drawbar: with 10º inclined towing ring Ø 40 mm, height-adjustable silent bushes.

- Low-maintenance slewing ring

- Braking system: EBS braking system, spring-loaded parking brake.

- Tie-down rings: 3 pairs of 10 t lashing rings recessed in the flatbed 2 pairs of 10 t lashing rings recessed in the upper part of the loading area, optional 5 pairs of 3 t lashing and stanchion recesses in the outer frame.

- 15-wire connection cable

- Solid, welded construction design made from high-strength fine-grained steel, chassis frame hot-dip galvanised by immersion bath, full-length cross-beams for maximum stability.

- Floor made of 50 mm softwood planks

- Wheel recesses above the rear wheels design made from high-strength fine-grained steel, chassis frame hot-dip galvanised by immersion bath, full-length cross-beams for maximum stability.

- Climbing aids design made from high-strength fine-grained steel, chassis frame hot-dip galvanised by immersion bath, full-length cross-beams for maximum stability.

- SAF flatbed trailer axles with closed S-cam brake, air suspension aggregate that can also lift and lower the rear axle.

- Loading ramps, hot-dip galvanised drive-on ramps (3100 mm x 750 mm), laterally movable, directly acting, fixed spring lifters for convenient operation, optimally secured by a turnbuckle and latch.

- Optional stowage box

- Light clusters, impact-proof and insulated, protected in the underride protection.

- Retro-reflective contour marking in accordance with ECE Directive R 48 white on the side, red in the rear.

 

TECHNICAL DATA:

HTD 509525
Permissible gross weight (kg)24.000 / 50.000 Internal dimensions (mm)9.822 / 2.540 
Own weight (kg)10.900Total dimensions (mm)11.790 x 2.540 x 3.760 
Load capacity (kg)13.100 / 39.100Drive-up angle10º
Load height (mm)890  Tyre size235/75 R17,5 x 20 pcs.
  • HUMBAUR - HTD50
Намерете повече за "HUMBAUR - HTD50"