Slurry tank, standard version, 2 axles bogie, 18020 - 20030 lt
MEPROZET – STANDARD MAXI 2
Chassis: Slurry tankers designed as self-supporting tank, mounted on double-axle bogie chassis, 2nd axle steering.
Tank: A steel, hot galvanised tank with central frame has internal strengthening rings and baffle. Closed rear head with Ø 600 mm hatch, with two connection pipes. 3” sight-glasses and level tube are mounted on the front head and connection pipes for valves on sides of the tank. A Ø 600 mm hatch and overflow safety valve are placed in the upper part of the tank.
Gate valves: A hydraulically controlled gate valve with a lifted spreading spoon is mounted on the rear head and manual gate valve on the side. A 2" connection pipe is mounted on the bottom of the tank, allowing to connect an additional discharge hose, e.g., for crops watering.
Operation: Tank filling is achieved by vacuum, made in the tank by the compressor, driven by a PTO shaft from the tractor. Tank emptying is done by overpressure or gravitationally enforced.
Spreading system: Sprinkling is done by a spreading spoon, which is a part of the standard tanker equipment. On request, other spreading devices can be used.
- pumping out of liquid waste, manure, municipal wastes
- transport and spreading onto fields and grasslands
- crops watering, sprinkling and fertilising
- end-stage fire extinguishing in the woods and in the fields
- water transport to building sites and roads
PN-3/18 (18,020 lt)
PN-3/18 (20,030 lt)
|Total length (mm)|
|Total width (mm)|
|Total height (mm)|
|Own weight (kg)|
|Gross weight (kg)|
|Vertical load (kN)|
|Recommended tractor power (HP)|
|Loading time (min)|
|Spreading width with spoon (m)|
|Compressor capacity (lt/min)|